Conference publications

Conference publications available for download:

Size: 548 KB System identification of a small size machine Abir, J., Morantz, P. and Shore, P. (2014). Proceedings of the 12th International Conference on Manufacturing Research (ICMR 2014), 9-11 September 2014, Southampton, UK, 35-40. Size: 456 KB Rotating sensor for new possibilities on Leitz Infinity Coordinate Measuring Machine Sanz, C., Cherif, A., Mainaud-Durand, H., Artoos, K., Morel, F., Morantz, P., Shore, P., Schneider, J. and Steffens, N. (2016). Poster abstract at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P1.18. Size: 316 KB Robot based sub-aperture polishing for the rapid production of metre-scale optics Tonnellier, X., Comley, P., Peng, X.Q. and Shore, P. (2013). Laser Metrology and Machine Performance X, Proceedings of the 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance (Lamdamap 2013), 20-21 March 2013, Buckinghamshire, UK, 269-278. Size: 507 KB Productive Modes for Ultra Precision Grinding of Freeform Optics Shore, P., Morantz, P., Read, R., Tonnellier, X., Comley, P., Jourdain, R. and Castelli, M. (2015), ASPE/ASPEN Summer Topical Meeting, 26-27 June 2014, Hawaii, USA, 103-106. Size: 550 KB Production of electronics and photovoltaics using a reel-to-reel process Graham, A., Morantz, P. and Comley, P. (2016). Poster abstract: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 457-458. Size: 345 KB Position errors due to structural flexible modes Abir, J., Morantz, P. and Shore, P. (2015). Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 1-5 June 2015, Leuven, Belgium, 219-220. Size: 529 KB Plasma surface figuring of large optical components Jourdain, R., Castelli, M., Morantz, P. and Shore, P. (2012). Photonics Europe 2012: Optical Micro and Nanometrology IV, 16-19 April 2012, Brussels, Belgium, 8430, 843011-1-843011-6. Size: 367 KB New potential for the Leitz Infinity Coordinate Measuring Machine Sanz, C., Cherif, A., Mainaud-Durand, H., Schneider, J., Steffens, N., Morantz, P. and Shore, P. (2015). Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 1-5 June 2015, Leuven, Belgium, 169-170. Size: 650 KB Monitoring and closed loop feedback control of ultrafast glass welding Yu, K.X.Z., Sparkes, M. R., Pangovski, K. and O'Neill. W. (2016). Poster abstract: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 445-446. Size: 515 KB Microwaves enable activated plasma figuring for ultra-precision fabrication of optics Bennett, A., Jourdain, R., Kirby, P., MacKay, P., Shore, P. Nicholls, J., Morantz, P. (2016). Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 269-270. Size: 40 KB Manufacturing machine automation and precision capability Morantz, P. (2014). Proceedings of the 20th International Conference on Automation and Computing (ICAC 2014), 12-13 September 2014, Cranfield University, Bedfordshire, UK. Size: 111 KB Machine concepts and developments in creating a precision reel to reel film fabrication system Shore, P., Comley, P., Morantz, P., Allsop, J., Walker, N. and Li, S. (2015). Proceedings of the 30th Annual Meeting of the American Society for Precision Engineering, 1-6 November 2015, Austin, TX, USA, 15-18. Size: 589 KB ISO compliant reference artefacts for the verification of focus variation-based micro-coordinate measuring machines Hiersemenzel, F., Claverley, J. D., Petzing, J. N., Helmli, F. and Leach, R. K. (2013). Proceedings of the 13th euspen International Conference, 27-31 May 2013, Berlin, Germany, 1, 148-151. Size: 548 KB Investigation of pre and post plating surface roughness of electroless nickel phosphorus coated substrate for diamond turning application Xia, P., Almond, H. and Impey, S. (2016). Poster abstract, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 469-470. Size: 710 KB Investigation of power dissipation in a collimated energy beam Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2015). The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2015), 15-20 August 2015, Harbin, China Size: 1 MB Influence of temperature changes on a linear motion system Abir, J., Shore, P and Morantz, P. (2015). 11th International Conference on Laser Metrology, Machine Tool, CMM and Robotics Performance (LAMDAMAP 2015), 17-18 March 2015, University of Huddersfield, UK, 130-139. Size: 415 KB High speed mask-less laser controlled precision deposition of metals Ten, J. S., Sparkes, M. and O'Neill, W. (2016). Poster abstract, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 517-518. Size: 526 KB High resolution laser micromachining of TiN coatings through the regulation of pulse characteristics Demir, A. G., Pangovski, K., O’Neill, W. and Previtali, B. (2013). Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, 27-31 May 2013, Berlin, Germany, 221-224. Size: 333 KB Fast figuring of large optics by reactive atom plasma Castelli, M., Jourdain, R., Morantz, P. and Shore, P. (2012). Modern Technologies in Space and Ground Based Telescopes and Instrumentation II, 1-6 July 2012, Amsterdam, Netherlands, 8450, 845034-1-845034-8. Size: 771 KB Evaluating femtosecond laser ablation of graphene on SiO2/Si substrate Dong, T., Sparkes, M., Durkan, C. and O'Neill, W. (2015). International Congress on Applications of Lasers & Electro–Optics (ICALEO), 18-22 October 2015, Atlanta, GA, USA. Size: 82 KB Development of an industrial robot based polishing platform for large optical components Tonnellier, X., Comley, P., Peng, X.Q. and Shore, P. (2013). Proceedings of the 3rd European Optical Society Manufacturing Optical Components, 13-15 May 2013, Munich, Germany. Size: 482 KB Creation of a control system for plasma delivery to increase determinism and robustness while processing using an ICP torch Zhou, H., Jourdain, R., Serantoni, V., Endrino, J. L. and Shore, P. (2016). Poster abstract: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 261-262. Size: 5 MB CFD analysis of an enhanced nozzle designed for plasma figuring of large optical surfaces Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2016). Poster abstract: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 459-460. Size: 122 KB Bottom-up modal analysis of a small size machine tool Abir, J., Morantz, P. and Shore, P. (2014). Proceedings of the 3rd Annual EPSRC Manufacturing the Future Conference, 23-24 September 2014, Glasgow, UK, 147. Size: 729 KB Analysis of model design used for the creation of advanced energy beam Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2014). 29th Annual Meeting for the American Society for Precision Engineering, 9-14 November 2014, Boston, M, USA. Size: 516 KB An accelerometer based feedback technique for improving dynamic performance of a machine tool Abir, J., Morantz, P., Longo, S. and Shore, P. (2016). Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 197-198. Size: 472 KB A study of defects induced by femtosecond laser on monolayer graphene Dong, T., Sparkes, M. and O'Neill, W. (2016). Poster abstract, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 545-546. Size: 621 KB A method for assessing measurement precision and stability of optical probes Norman, J., Tonnellier, X. and Morantz, P., (2016). Poster abstract: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, 181-182.
Next »Page 1 of « Prev

Back to Research