Outreach presentations

Outreach presentations available for download:

Size: 1 MB Ultra precision encoder technology for position referencing Hollstein, K. (2015). Masters Research Exhibition, 15 September 2015, Cranfield University, UK. Size: 6 MB Ultra precision control of a reel to reel process Graham, A. (2016). PhD project poster, Cranfield University, UK. Size: 6 MB Ultra precision control of a reel to reel process Graham, A., Morantz, P. and Comley, P. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 757 KB The fabrication of 12" liquid crystal on silicon devices Chang, X., Li. K., Xu, H. and Chu, D. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 1 MB Roll to Roll Manufacturing of Transparent Conductive Electrodes using Cu Nanowires D'Addario, R., Karcz, A., Khalid, A., Rubio Garcia, L., Wang, W., Huang, Z., Endrino Armenteros, J., Comley, P. and Lonne, Q. (2016). Manufacturing, Materials and Design Group Project Presentation Day, 29 April 2016, Cranfield University, UK. Size: 507 KB Productive Modes for Ultra Precision Grinding of Freeform Optics Shore, P., Morantz, P., Read, R., Tonnellier, X., Comley, P., Jourdain, R. and Castelli, M. (2015), ASPE/ASPEN Summer Topical Meeting, 26-27 June 2014, Hawaii, USA, 103-106. Size: 2 MB Production of electronics and photovoltaics using a reel to reel process Graham, A., Morantz, P. and Comley (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P6.30. Size: 4 MB Precision metrology for large freeform non-specular surfaces Norman, J., Tonnellier, X. and Morantz, P. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 4 MB Precision Manufacturing - Current Status and Future Development Shore, P. (2013). 3rd International Conference on Advanced Manufacturing Engineering and Technologies (NewTech 2013), 27-30 October 2013, Stockholm, Sweden Size: 2 MB Position errors due to structural flexible modes Abir, J., Morantz, P. and Shore, P. (2015). Poster presentation: 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 1-5 June 2015, Leuven, Belgium Size: 6 MB Ordered nanomaterials for enhanced electron field emission Collins, C., Parmee, R. J., Milne, W. I. and Cole, M. T. (2015). 2015 Materials Research Society Fall Meeting and Exhibit, 29 November-4 December 2015, Boston, MA, USA. Size: 3 MB Ordered nanomaterials for electron field emission for x-ray sources Collins, C. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 1 MB Multiple beam, powder bed fusion, additive manufacturing Payne, A., Sparkes, M. and O'Neill, W. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Monitoring and closed loop feedback control of ultrafast glass welding Yu, K.X.Z., Sparkes, M. R., Pangovski, K. and O'Neill. W. (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK. P6.24 Size: 2 MB Microwave generated plasma figuring for ultra precision engineering of optics Bennett, A., Jourdain, R., Kirby, P., MacKay, P., Shore, P. Nicholls, J., Morantz, P. (2016). 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK. Size: 3 MB Microwave enable activated plasma figuring for ultra precision fabrication of optics Bennett, A. (2016). PhD project poster, Cranfield University, UK. Size: 5 MB Metrology challenges for highly parallel micro-manufacture Leach, R. (2013). Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, 20 November 2013, National Physical Laboratory, Teddington, UK. Size: 1 MB Laser processing of graphene for device application Dong, T. (2015). brainSTEMMs, 19 November 2015, Lucy Cavendish College, University of Cambridge, UK. Size: 1 MB Large scale (1.4 m wide) roll to roll research platform Comley, P. (2015). 4th Annual EPSRC Manufacturing the Future Conference, 17-18 September 2015, Univesity of Cambridge, UK. Size: 4 MB Large scale (1.4 m wide) roll to roll research platform O'Hara, M. (2015). Plastic Electronics Europe, 28-29 April 2015, Berlin, Germany and at Advanced Engineering UK, 4-5 November 2015, Birmingham, UK. Size: 3 MB Investigation of pre and post plating surface of electroless nickel phosphorus (EN-P) coated substrate for diamond turning application Xia, P., Almond, H. J. A. and Impey, S. A. (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P6.36. Size: 2 MB Investigation of power dissiptiation in a collimated energy beam Yu. N., Jourdain, R., Gourma, M. and Shore, P. (2015). The 6th International Conference of the Asian Society for PRecision Engineering and Nanotechnology (ASPEN 2015), 15-20 August 2015, Harbin, China. Size: 4 MB Influence of temperature changes on a linear motion system Abir, J., Shore, P. and Morantz, P. (2015). 11th International Conference on Laser Metrology, Machine Tool, CMM and Robotics Performance (LAMDAMAP 2015), 17-18 March 2015, University of Huddersfield, UK. Size: 1 MB Imprinting lithography for flexible transparent plastic substrate by using copper mould in mass production Lieotrakool, S. (2015). Masters Research Exhibition, 10 September 2015, Cranfield University, UK. Size: 2 MB Implementation of a linear optical encoder for high precision in line position referencing of plastic film in a roll to roll system O'Connor, D., Moschetti, G., Jones, C. W., Hollstein, K., Morantz, P. and Comley, P. (2016). innoLAE 2016, 1-2 February 2016, Cambridge, UK. Size: 630 KB Holographic enhancement of fibre optic sensors Senanayake, J., Wilkinson, T. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 1 MB High speed mask-less laser controlled precision deposition of metals Ten, J.S., Sparkes, M. and O'Neill, W. (2016). Poster presentation, 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P7.19. Size: 2 MB Femtosecond laser processing of graphene for device applications Dong, T. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 9 MB Feedback based technique for improving dynamic performance of a small size machine tool Abir, J., Longo, S., Morantz, P. and Shore, P. (2016). American Society for Precision Engineering 2016 Spring Topical Meeting: Precision Mechatronic System Design and Control, 20-22 April 2016, Cambridge, MA, USA. Size: 10 MB Energy balance investigation of an inductively coupled plasma torch for plasma figuring Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2016). euspen's Special Interest Group Meeting: Thermal Issues, 17-18 March 2016, Prague, Czech Republic. Size: 21 MB Diamond machinable coating for large R2R rollers and hydrostatic bearings Xia, P. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Development and optimisation of an optofluidic nano tweezers system for trapping nanometre crystals for synchrotron x-ray diffraction experiments Diaz, A., O'Neill, W. and Docker, P. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 3 MB Design, fabrication and characterisation of hierarchial branching vascular networks Aguilar, D. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Design and development of solid state additive manufacturing techniques Brown, S. (2016). Design and development of solid state additive manufacturing techniques, Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 5 MB Design and control of a compact ultra-precision machine for high dynamic performance Abir, J., Morantz, P., Longo, S. and Shore, p. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Design and control of a compact ultra-precision machine for high dynamic performance Abir, J., Morantz, P. and Shore, P. (2014). 12th International Conference on Manufacturing Research (ICMR 2014), 9-11 September 2014, Southampton, UK. Size: 7 MB Creation of a control system for plasma delivery Zhou, H., Jourdain, R., Sernatoni, V., Endrino, J. L., Shore, P. and Morantz, P. (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P2.30. Size: 2 MB Compact Machining Centre: Meso Research Platform Morantz, P., Shore, P. and Castelli, M. (2015). Poster presentation: 4th Annual EPSRC Manufacturing the Future Conference, 17-18 September 2015, Universiy of Cambridge Size: 6 MB CFD analysis of an enhanced nozzle designed for plasma figuring of large optical surfaces Yu, N. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 6 MB Centre for Innovative Manufacturing in Ultra Precision/Dynamically controlling the position and distortion of transparent flexible film (to microns) Morantz, P (2013). Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, 20 November 2013, National Physical Laboratory, Teddington, UK. Size: 3 MB Carbon nanotube based production of field emission cathodes Orozco, F. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Bottom-up modal analysis of a small size machine tool Abir, J., Morantz, P. and Shore, P. (2014). Poster presentation at the 3rd Annual EPSRC Manufacturing the Future Conference, 23-24 September 2014, Glasgow, UK. Size: 1 MB Anode materials for high power microwave devices Gortat, D. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB Analysis of nozzle design used for the creation of advanced energy beam Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2014). 29th Annual Meeting for the American Society for Precision Engineering, 9-14 November 2014, Boston, MA, USA. Size: 2 MB Analysis of nozzle design used for reducing the MSF errors in rapid plasma figuring Yu, N., Jourdain, R., Gourma, M. and Shore, P. (2014). Poster presentation at the 3rd Annual EPSRC Manufacturing the Future Conference, 23-24 September 2014, Glasgow Science Centre, Glasgow, UK. Size: 13 MB Advancement of plasma figuring technology through optimisation of energy beam Yu, N., Jourdain, R., Gourma, M., and Shore, P. (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P6.31. Size: 2 MB A precision fibre optic O2 sensor Barrington, J. (2016). Poster presentation to the EPSRC Centre for Innovative Manufacturing in Ultra Precision Steering Meeting Committee, 24 February 2016, Cranfield University, UK. Size: 2 MB A precision fibre optic CO2 sensor Barrington, J. H., Partridge, M., James, S. W. and Tatam, R. P. (2016). PhD project poster, Cranfield University, UK. Size: 10 MB A method for assessing measurement precision and stability of optical probes Norman, J., Tonnellier, X. and Morantz, P. (2016). Poster presentation at the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May-3 June 2016, University of Nottingham, Nottingham, UK, P1.68.
Next »Page 1 of « Prev

Back to Research